Precaution printers early can avoid the problem before the problem was begin .Use this solution on a regular basis to maintain the condition of your HP LaserJet printer in prime condition, be sure to read the user guide for your printer manual before you start printing.
Neat and clean
Make habit to clean the outside of the laser printer after each time you change the toner, after printing about 2,500 sheets, or each time the print quality problems (such as point or dirty) start to appear. Be sure to unplug the printer and let it be cold before the start of a maintenance. Drabble a cloth that is enough water to clean the printer, do not use ammonia-based cleaning in or around your printer.
To clean the inside of the printer, use a dry cloth material, such as cloth material for the lens. Using a computer vacuum cleaner to clean the area for cartridge can cause damage, so only use cloth. Be careful not touch the transfer roller (black foam, which is under the toner cartridge). Oil from your hands can learn on the quality of the printing problem.
If you move the toner cartridge to clean the toner cartridge, do not leave the toner cartridge is exposed to light because it can cause damage. If the toner on your clothes, clean with a dry cloth and wash clothing in cold water. Hot water to make toner can not be on your clothes.
You can use the paper to clean the path of transparency paper. Follow these steps:
• Enter a paper to transparency in the paper.
• Make sure the printer is Ready
• Press and hold Go button for 10 seconds. Paper transparency will fade into the printer. Each of the three printer lights will blink until the cleaning process is complete. Discard paper transparency.
If the paper does not have transparency, use paper, but do work two or three times to ensure was cleanness.
If the paper into the printer does not regularly (no media into the printer, paper, or more than the entry sheet every time, can be roller's taker (pickup roller) need to be cleaned or replaced.
Authority to replace the roller, follow the steps below:
• Unplug power cable from the printer, the printer and let it become cold.
• Open the cover toner cartridge, toner cartridge and move.
• Find a roller authorities.
• Remove the small white tab that is located on each side of the roller with the authorities avoid pressing roller, and then turn the roller to the front of the authorities.
• The slow roller authorities to pull up and out.
• Place the new roller authority in the place where roller authorities before.
• Turn the top of the roller to the new authorities in the position until the white tab that is on a roller each lock in place.
• Install back toner cartridge, and close the door cartidge toner.
• Turn the printer so that the back up.
To clean the roller from the authorities to change, move the roller according to the recommended above and then rub with a cloth material drabble with isopropyl alcohol. Then, with a dry cloth, clean roller authorities to mengilangkan dust. Let the alcohol dry before re-install the player. Caution: Alcohol flammable and should be dissociated from the fire or heat source (including the mover in your laser printer).
Thursday, January 15, 2009
Wednesday, January 7, 2009
Basic knowledge of laser and Inkjet
Basic knowledge of laser and Inkjet
Gotten by several technological kinds ink jet. The kind that was pioneered by HP and continued to be developed was thermal ink jet technology (TIJ). Printer was based on TIJ used a set nozzle very small to create millions of drops of ink, placed him in the exact combination on paper or the other printing media. Hawlett Packard continued to complete this technology to achieve printing technology that was superior with used as far as 31 drops of ink that was very small to print a point. This enabled the range creation of the colours that was amazing for very realistic results. Traditionally, black ink (K) was produced through one cartridge single and the colours cyan, magenta, and yellow (CMY) was united to form one cartridge three colours. If the user of the non-business often used the mixture of these colours in the level that in general same, the user of the business possibly used the certain colour more often, then cartridge one colour became more general for the business to using that was more economical. To more increased the speed, reliability, and cost saving, technology inkjet at this time used one modular ink delivery system. This system separated the head printed (print head) from cartridge ink, enabled the head printed to move faster and cartridge ink to keep ink more. Chip clever in the head printed will supervise the use of ink and the situation the head printed for the quality and efficient operation consistently. The type of paper, that also was known as the media, to be able to have the dramatic effect on the quality of the picture of TIJ. Based on the requirement, heterogenous the media could be chosen, from normal paper for the use of the printing of the big volume until paper was stratified especially Hawlett Packard that was drafted for results that shine, durable, and had a quality the photograph.
Basics of using the laser
printer laser, laser photoconductive drum at a point in the location of a particular printer. Through this process, drum "drawn" with the electricity that interesting combination of toner particles to the right in the drum to transfer to the printed page. Color laser printer is a multi-pass using a picture of the drum for each color CMYK. A solution that is faster, the technology of printer, single-pass or in-line four-drum has a page that allows printed in one of the last way.The last step from laser is merging (fusing). The temperatur of winder is so high and the compression of winder , thaw and then combine toner particles on the plastic paper. Due to heat generated in this process, the type of media that can be used for printing LaserJet more limited compared with the media to use inkjet printing.
The technological comparison of the two technologies inkjet and the laser in printer Hawlett Packard was indeed designed for prominent results, efficient, and could be relied on for various requirements. The difference of technology from each kind printer enabled them to be used for the use and the requirement for the certain printing.
HP Inkjet Technology
1.The quality of the perfect printing, competent, was easy to be used, and not expensive
2.Good for special paper, wide-format, and the media's other kind that unique
3.The printing capacity of the picture that was realistic like picture
4.There was no cost for the replacement fuser or drum
5.Usually smaller in size
HP LaserJet technology
1. The perfect printing quality, reliable, easy to use, and not expensive
2. Good for printing with the large volume and the results quickly to document the long
3. Supplies can be used to create a lot of prints
4. Have some paper that can accommodate lots of paper and final settlement of the options
Gotten by several technological kinds ink jet. The kind that was pioneered by HP and continued to be developed was thermal ink jet technology (TIJ). Printer was based on TIJ used a set nozzle very small to create millions of drops of ink, placed him in the exact combination on paper or the other printing media. Hawlett Packard continued to complete this technology to achieve printing technology that was superior with used as far as 31 drops of ink that was very small to print a point. This enabled the range creation of the colours that was amazing for very realistic results. Traditionally, black ink (K) was produced through one cartridge single and the colours cyan, magenta, and yellow (CMY) was united to form one cartridge three colours. If the user of the non-business often used the mixture of these colours in the level that in general same, the user of the business possibly used the certain colour more often, then cartridge one colour became more general for the business to using that was more economical. To more increased the speed, reliability, and cost saving, technology inkjet at this time used one modular ink delivery system. This system separated the head printed (print head) from cartridge ink, enabled the head printed to move faster and cartridge ink to keep ink more. Chip clever in the head printed will supervise the use of ink and the situation the head printed for the quality and efficient operation consistently. The type of paper, that also was known as the media, to be able to have the dramatic effect on the quality of the picture of TIJ. Based on the requirement, heterogenous the media could be chosen, from normal paper for the use of the printing of the big volume until paper was stratified especially Hawlett Packard that was drafted for results that shine, durable, and had a quality the photograph.
Basics of using the laser
printer laser, laser photoconductive drum at a point in the location of a particular printer. Through this process, drum "drawn" with the electricity that interesting combination of toner particles to the right in the drum to transfer to the printed page. Color laser printer is a multi-pass using a picture of the drum for each color CMYK. A solution that is faster, the technology of printer, single-pass or in-line four-drum has a page that allows printed in one of the last way.The last step from laser is merging (fusing). The temperatur of winder is so high and the compression of winder , thaw and then combine toner particles on the plastic paper. Due to heat generated in this process, the type of media that can be used for printing LaserJet more limited compared with the media to use inkjet printing.
The technological comparison of the two technologies inkjet and the laser in printer Hawlett Packard was indeed designed for prominent results, efficient, and could be relied on for various requirements. The difference of technology from each kind printer enabled them to be used for the use and the requirement for the certain printing.
HP Inkjet Technology
1.The quality of the perfect printing, competent, was easy to be used, and not expensive
2.Good for special paper, wide-format, and the media's other kind that unique
3.The printing capacity of the picture that was realistic like picture
4.There was no cost for the replacement fuser or drum
5.Usually smaller in size
HP LaserJet technology
1. The perfect printing quality, reliable, easy to use, and not expensive
2. Good for printing with the large volume and the results quickly to document the long
3. Supplies can be used to create a lot of prints
4. Have some paper that can accommodate lots of paper and final settlement of the options
Subscribe to:
Posts (Atom)
